PROCESS

Mixing materials according to customer needs.

Forming goods according to demand and conducting a rigorous review.

Under the protection of nitrogen hydrogen (NH3) gas, the temperature is 800 ° (bronze) ~ 1150 ° (stainless steel) sintering, the sintering time is about 4HR (depending on the workpiece material).

Function: Increase accuracy (including external dimensions, true degree, etc.) with a minimum accuracy of 0.005mm.

Function:
1. The appearance of the workpiece is black.
2. Increase the surface hardness of about HRB20°
3. Increase the rust prevention capacity (about 20HR for salt water test)
4. Match with the component color.
5. Use pure water distillation No harmful substances.

Type 1：
The types of vibrating beads are divided into
＊Beadless vibration
＊Ball vibration(ψ1.0~ψ3.0mm)
＊UFO bead vibration
＊Sponge stone vibration
Type 2：
The type of vibration interface is divided into
＊Dry vibration (forbidden oil)
＊Water vibration (stainless steel)
◎Oil vibration (general)

According to the requirements of the client, more than two workpieces (powder parts + non-powder parts) are combined to control the quality of the pipe, which is convenient for customers to use, reduce customer material management and increase service diversity.

Through the special brush design, the sharp angle and the burr of the workpiece's clamping line are removed.

A piece of copper is infiltrated into the iron or alloy steel workpiece. To increase strength and density.

Using the vacuum principle, the air in the capillary pores of the workpiece is evacuated in an atmosphere pressure of -72 mmHG, and the customer-specified oil (viscosity index 30-80) is injected.

The appearance of the workpiece is subjected to mucosal rust prevention (viscosity index 5-15). Salt water test over 24hr, over 180 days in normal temperature climate.